 |
|
Networking,
Connectivity & Protection Products
| __ |
Frame
- UTP |
| 66-CLIP
CONNECTING BLOCKS |
These
industry-standard blocks are used in equipment
rooms to connect voice and data network wiring
to customer premises equipment. They are also
used in remote and intermediate wiring closets
throughout larger installations as common connecting
points for nearby equipment. Constructed of
high-impact, fire-retardant molded thermoplastic,
Leviton connecting blocks utilize phosphor bronze
quick-connect insulation displacement 66-clips
for ease of installation, and proven mechanical
and electrical reliability. The 66 blocks may
be installed individually or in pairs in a cross-connect
system to facilitate subsequent adds, moves,
and changes. In a cross-connect system, jumper
wires are used to make connections between blocks.
Stations can then be disconnected and reassigned
without disturbing station wire-simply by moving
the jumpers. Bridging clips can sometimes be
used on split 50 blocks in place of jumpers.
|
M
Block: 25-Pair
[A] Contains
50 rows, each with a single clip having four
slots as shown at left. Incoming cable pairs
are connected by terminating the tip conductor
on the leftmost slot of one row, and the ring
conductor on the leftmost slot of the next lower
row. The three remaining slots in each clip
are available for cross-connects. |
|
Split
M Block: 50-Pair
[B] The split
M block, like the 25-pair M block, contains
50 rows of clips, but instead of one 4-slot
clip, each row contains two separate 2-slot
clips. By terminating 25 incoming pairs on the
slots of the left-hand clips and an additional
25 pairs on the slots of the right-hand clips,
50 cross-connects can be made. Alternatively,
bridging clips may be used to connect the two
adjacent sets of clips together. (See Page C9.)
Category LL 5e-rated. |
|
M
Block with Female Connector
[C] 50-pair
M block with prewired, pretested 25-pair female
connector on left side fanning strip to speed
connection of incoming pairs. |
|
M
Block with Female and Male Connectors
[D] 50-pair
M block with prewired, pretested 25-pair female
connector on left and male connector on right
for fastest installation. Simply plug in connectors
and insert bridging clips to complete the connections. |
|
Connectorized
Demarc Block
[E] Designed
for use at the demarcation point, this 50-pair
M block includes mounting bracket and snap-on
orange cover with designation strip. Prewired,
pretested 25-pair female connector mounted on
right side speeds connection of customer premise
equipment to the network interface. |
|
| Prewired
66 Blocks
[F] The 66
M1-50 block and 89-D bracket come preassembled
with designated jacks. |
|
|
<Back
|
 |
|
|
Missing
out on Fiber Optic Projects because you don't have
trained personnel or the expensive and termination
kits needed to do the job correctly?
We
can help click here for more information on our training
programs
|
|
 |
|
